Wax Dressing – Satin Finish

Always TEST PRODUCT ON SMALL AREA FIRST. Allow to cure for 24 hrs and check for

desired results, colour change and protection level.

Check that area is dry, clean and free of all residue and previous treatments.

Evenly apply 1 coat of Satin Wax Dressing to create an even finish on surface. The product should

not pool and not be over applied.

After 1 hour or when surface is touch dry, check surface to see if desired results have been achieved.

For highly absorbent stone apply a second coat after 1 hours, using steps 3 and 4 as above.

The floor is fine for light foot traffic in socks and slippers after 2 hours from final coat.

Allow 48 hours before wetting the floor or contact with water or stains

Coverage

Coverage Rates Per 1Litre per coat

High Absorbency Honed Natural Stone 8 – 12 sqm

Medium Absorbency Honed Natural Stone 15 – 25 Sqm

Floor preservation and ongoing Maintenance

Surfaces treated with Matt Wax Dressing, should be maintained with Tile Master Cleaner No2

diluted at 1-200.(1 cap in 5 litres of Water)

For upkeep, the wax can be diluted with 200ml of wax in 1 litre of water and applied to the

floor using a mop. this will revitalise the floor.