0161 444 0377


Secure transactions via your preferred payment method

Select Page

Wax Dressing – Satin Finish



Satin wax dressing for Natural Stone – 1 Ltr



Select quantity


What will it Dress

  • Satin Wax Dressing is an ideal surface sealer to protect natural stone and gives a wonderful matt finish.
  • The Wax Dressing is perfect for use on Stone, unpolished marble, limestone, quarry tiles, granite and any absorbent stones.
  • Using the TileMaster protection system your tiles will have an excellent and strong surface barrier which helps make maintenance easier.

Warning: Does not protect stone from acid or chemical damage, surface wear or scratching. Does not protect from oil.


Where to use

  • Perfect for use on your floors, walls, split face tiles or anywhere around your home to protect natural stone. (Not Suitable for wet areas or outdoors.)


  • Enhances the natural appearance of surface and gives matt finish.
  • Low odour and does not give off unpleasant smells.
  • Protects, enhances and maintains tiles in one solution.
  • Easy to apply and Ready to USE
  • Aids maintenance and makes it easy to clean your floor


Additional information

Weight N/A

1 litres, 5 Litres

How To Use

Always TEST PRODUCT ON SMALL AREA FIRST. Allow to cure for 24 hrs and check for

desired results, colour change and protection level.

Check that area is dry, clean and free of all residue and previous treatments.

Evenly apply 1 coat of Satin Wax Dressing to create an even finish on surface. The product should

not pool and not be over applied.

After 1 hour or when surface is touch dry, check surface to see if desired results have been achieved.

For highly absorbent stone apply a second coat after 1 hours, using steps 3 and 4 as above.

The floor is fine for light foot traffic in socks and slippers after 2 hours from final coat.

Allow 48 hours before wetting the floor or contact with water or stains



Coverage Rates Per 1Litre per coat

High Absorbency Honed Natural Stone 8 – 12 sqm

Medium Absorbency Honed Natural Stone 15 – 25 Sqm


Floor preservation and ongoing Maintenance

Surfaces treated with Matt Wax Dressing, should be maintained with Tile Master Cleaner No2

diluted at 1-200.(1 cap in 5 litres of Water)

For upkeep, the wax can be diluted with 200ml of wax in 1 litre of water and applied to the

floor using a mop. this will revitalise the floor.

Product results


MSDS & Data Sheets


SDS Download  

Label Download


pH  Between 6 and 8



  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • P102: Keep out of reach of children.
  • P233: Keep container tightly closed.
  • P262: Do not get in eyes, on skin, or on clothing.
  • P264: Wash skin thoroughly after handling.
  • P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
  • P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333+313: If skin irritation or rash occurs: Get medical advice.



No dangerous component according to Regulations. (CE) no. 1907/2006 and (CE) No.453/2010

Find a TileMaster Pro

Find Now


There are no reviews yet.

Be the first to review “Wax Dressing – Satin Finish”

Your email address will not be published. Required fields are marked *

Pin It on Pinterest