Same day despatch

*Orders before 12pm mon-fri

Free Delivery

on orders over £150

Finance Available

Contact us before ordering

Trade Buyer

Apply for a trade account here

Stone & Tile Wax Repair Filler Kit

£50.00

The stone filler is a tough wax perfect for filling cracks, holes and marks in stone and tiles.

 

1 in stock

Description

With this Stone and Tile Hot Wax Repair Kit you can now fix holes, cracks and chips in wall and floor tiles to a great finish. The set contains tough hot wax Filler in five different and intermixable colours as well as all the necessary accessories. A Clear Lacquer Brush Pen is included in the kit to seal and to protect the repaired area. Suitable for surfaces such as travertine, marble, ceramic, porcelain, terrazzo and cast stone.

  • The kit is supplied in a plastic box.
  • All components necessary for a good repair are included.
  • The filler is very hard and resistant, the melting point is 130 ° C.
  • The colours can be mixed together and it can be over painted.
  • The water absorption is less than 1%.

Contents

  • 5x Filler sticks (4 cm) White, Grey & 3 Terracotta shades
  • 1x Special Fillers Applicator including
  • Sanding Pad, small Sanding and Polishing Cloth
  • 1x Sanding and Polishing Cloth
  • 1x Cotton Cloth
  • 1x Battery Operated Melter
  • 1x Clear Lacquer Brush Pen as sealing pen, sheen level: high gloss

Suitable for:

  • Tile repair kit, ceramic tiles, wall tiles, floor tiles
  • Stone repair kit for natural stone
  • Marble worktop repair kit
  • Tile chip repair kit

How To Use

METHOD
Always wear gloves, Stone repair resin is harder when set than most stone and is particularly difficult to get off
the skin when set.
1. Thoroughly clean the hole or crack ensuring you remove any loose debris, dirt or loose and then
vacuum to remove any remaining dust.
2. Tape around the hole or crack using a good quality masking tape. This stops any excess filler going
on the tile.

3.Turn on the hot knife and start to melt the wax into the hole or crack

4. Leave the filler for around 10 seconds to harden. Once this happen remove the masking tape and scrape off
the excess using the plastic sanding tool
5. Check you work and repeat or apply more colours in required

Safety

SDS Download

Label Download

 

pH  NA

 

WARNINGS

  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • P102: Keep out of reach of children.
  • P233: Keep container tightly closed.
  • P262: Do not get in eyes, on skin, or on clothing.
  • P264: Wash skin thoroughly after handling.
  • P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
  • P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333+313: If skin irritation or rash occurs: Get medical advice.

 

CONTAINS

 

SUBSTANCE   Codes of class and hazard category Codes of hazard

 

Quantity
CAS: 100-42-5

EINECS: 2002-851-5

n. Index: 601-026-00-0

n. REACH registration: 01-2119457861-32-XXXX

 

Flam. Liq. 3

Asp. Tox. 1

Acute tox. 4

STOT RE 1

STOT SE 3

Eye irrit 2

Skin irrit 2

H226 – H361d – H332 – H372 (auditory organ) – H315 – H319 10-20%

Results

Reviews (0)

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Product Enquiry

Product Enquiry

Scroll to Top