0161 444 0377

info@tilemaster.co.uk

Secure transactions via your preferred payment method

Select Page

Junckers Strong Premium Wood Lacquer Matt

RRP: £52.71

£52.71

Description

One-component water-based lacquer for highly trafficked wooden floors in commercial and domestic areas.
Low odour and toughest one-component polyurethane floor lacquer on the market.
Non yellowing and excellent clarity also on dark coloured floors.
Suitable for previously sealed as well as on new or fully sanded floors.
5L x £52.71ex

2 in stock

Description

For professional use only.
One-component water-based lacquer for highly trafficked wooden floors in commercial and domestic areas.
Low odour and toughest one-component polyurethane floor lacquer on the market.
Non yellowing and excellent clarity also on dark coloured floors.
Suitable for previously sealed as well as on new or fully sanded floors.

Junckers Strong Premium is Indoor Climate Certified
An Indoor Climate Certified product has undergone extensive degassing and odour tests. This ensures that there are no chemical substances in the product, which adversely affect the air quality in the room.

 

Additional information

Weight 5 kg

How To Use

Untreated/Sanded Floors: Ensure that the surface is absolutely clean, dry and free
from dust, wax, grease, polish, soap residues etc. Sand the surface to remove dirt and
irregularities. Vacuum thoroughly and wipe off with a cloth well wrung in clean water.
Prime with one coat of Junckers PreLak, Junckers ProSeal or Junckers BasePrime. Leave to
dry. Sand with 150-180 grit sandpaper along the fibres of the wood. Vacuum sanding
dust and wipe off with a cloth well wrung in clean water.
Apply one coat of Junckers Strong Premium. Leave to dry overnight and then apply the
finishing coat.
Previously sealed floors: Clean with Junckers SylvaNeutralizer. Sand thoroughly
using grit 150-180. Vacuum sanding dust and wipe off with a cloth well wrung in clean
water.
Trial applications should be conducted on a couple of spots, 2 coats at 4 hours interval.
After drying for 24 hours check the spots for adhesion by scraping with the edge of a
coin. If the adhesion is functioning and the appearance of the surface is acceptable, the
floor can be sealed with one coat of Junckers Strong Premium.
If the trial application is not satisfactory, proceed as described under “Wax/Polish Treated
floors”.
Wax/Polish treated Floors: Machine sand by first using grit 24-36 to strip old coats.
Then remove abrasion marks using grit 60-80. Finally, use grit 120-150 to obtain a
completely smooth surface. Vacuum thoroughly. Treat the floor as described under
“Untreated/ Sanded floors”.

 

Coverage Rates

10 – 12 sqm per litre per coat

Product Results

Video

coming soon

MSDS & Data Sheets

MSDS Sheet

Technical Data Sheet

 

WARNINGS

  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • P102: Keep out of reach of children.
  • P233: Keep container tightly closed.
  • P262: Do not get in eyes, on skin, or on clothing.
  • P264: Wash skin thoroughly after handling.
  • P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
  • P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333+313: If skin irritation or rash occurs: Get medical advice.

 

CONTAINS

Ingredient Identifier CAS number Identifier CAS number % w/w Classification according to Regulation 1272/2008
Toluene 108-88-3 203-625-9 <20% H290 H315 H319
Naphta 6774-2-48-9 265-150-3 60 – 90% H226 H304 H336
Tetracloroetilene 127-18-4 204-825-9 <0,05% H290 H315 H319

Find a TileMaster Pro

Find Now

Reviews

There are no reviews yet.

Be the first to review “Junckers Strong Premium Wood Lacquer Matt”

Your email address will not be published. Required fields are marked *

Pin It on Pinterest