All in One Honed

How To Use

Always TEST PRODUCT ON SMALL AREA FIRST. Allow to cure for 24 hrs and check for

desired results, colour change and protection level.

Check that area is dry, clean and free of all residue and previous treatments.

Evenly apply 1 generous coat of all in one sealer to saturate the tile. The tile should hold a wet

or glass like look for about 5 seconds. Apply more sealer if required to achieve this.

After 10 minutes or before the sealer dries on the surface, remove and buff off any excess

sealer using clean and dry white towels or cloths. To remove stubborn residue, simply

reactivate using a clean cloth, slightly wet with all in one sealer .

For highly absorbent stone apply a second coat after 3 hours, using steps 3 and 4 as above.

The floor is fine for light foot traffic in socks and slippers after 4 hours from final coat.

Allow 48 hours before wetting the floor or contact with water or stains

Coverage

Coverage Rates Per 1Litre per coat

High Absorbency Honed Natural Stone 10 – 15 Sqm

Medium Absorbency Honed Natural Stone 15 – 20 Sqm

Floor preservation and ongoing Maintenance

Surfaces treated with all in one sealer, should be maintained with Tile Master Cleaner No1 or No2

depending on surface type, diluted at 1-50.(1 cap in 5 litres of Water)