Same day despatch

*Orders before 12pm mon-fri

Free Delivery

on orders over £150

Finance Available

Contact us before ordering

Trade Buyer

Apply for a trade account here

Bona Mega One 5 Litre


Bona Mega ONE is a primer and topcoat in one, suitable for heavy domestic and light commercial areas.

Available in Matt or Silk Matt


Best For Application

Bona Applicator Roller

Quality roller with a polyester pile. Good for maintaining a high application rate when using Bona Meha One and HD Traffic



Bona Mega ONE is a primer and topcoat in one, suitable for heavy domestic and light commercial areas. It dries quickly, it is easy to abrade, non-yellowing and it carries excellent build characteristics. It functions as your one partner in wood floor treatment.

  • Non-yellowing
  • Reduced downtime
  • Excellent flow and leveling
  • Great on light wood


Product Data

Weight 5 kg

Matt, Silk Matt

How To Use


Ensure floor is acclimatized to its end-use environment, well sanded, dry and free from sanding dust, oil, wax and other contamination. Allow lacquer to reach room temperature, insert filter and shake the container thoroughly before use. Optimal application conditions are between 18-25C and 30-60% relative air humidity. High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13C.


1. Apply lacquer using a Bona Roller. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps. 2. Allow to dry properly before applying further layers of lacquer. Anticipate slightly longer drying time for each layer that is applied. 3. Make an intermediate sanding before the final coat using TileMaster Grit 120 Mesh or similar. Remove any dust before applying the final layer of lacquer. Note: If exceeding 24 hours between coats, the surface should always receive a light intermediate sanding. The floor will take light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 5 days before covering with carpets or other floor coverings or loading with heavy objects. Also avoid damp mopping the floor during this time. Clean the floor with Bona Cleaner or Bona Wood Floor Cleaner and a microfibre pad. For maintenance and upkeep of the surface, floors can be overcoated at intervals with additional coats of lacquer. The frequency of this operation can be greatly reduced if Bona Freshen Up or Bona Wood Floor Refresher is applied periodically. This will restore the appearance of a dull floor whilst still allowing further coats of lacquer to be applied without the need for sanding the floor back to bare timber. Detailed maintenance instructions are available by calling 0161 444 0377


MSDS Sheet Technical Data Sheet  


  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • P102: Keep out of reach of children.
  • P233: Keep container tightly closed.
  • P262: Do not get in eyes, on skin, or on clothing.
  • P264: Wash skin thoroughly after handling.
  • P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
  • P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333+313: If skin irritation or rash occurs: Get medical advice.


Ingredient Identifier CAS number Identifier CAS number % w/w Classification according to Regulation 1272/2008
Toluene 108-88-3 203-625-9 <20% H290 H315 H319
Naphta 6774-2-48-9 265-150-3 60 – 90% H226 H304 H336
Tetracloroetilene 127-18-4 204-825-9 <0,05% H290 H315 H319


Reviews (0)

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.



Continue as a Guest

Product Enquiry

Product Enquiry

Scroll to Top