Ceramic & Porcelain Tile Cleaner 1

TileMaster Cleaner No.1 is a professional, pH-neutral cleaner for ceramic and porcelain tiles. It removes built-up dirt and grease from both tile and grout without acids, alkalis or bleaches, so it is safe to use as an everyday cleaner and maintainer in kitchens, hallways and bathrooms.

Key benefits

• Deep cleans tiles and grout
• Built-in degreaser for grime and grease
• pH neutral: contains no acids, alkalis or bleaches
• Cleans without damaging or tarnishing the surface
• Highly concentrated, from deep cleans to daily maintenance
• At 1:200 it dries streak-free, so no rinsing is needed
• Biodegradable
• Can be used by hand or with a floor cleaning machine

Suitable surfaces

• Ceramic tiles
• Porcelain tiles
• Vinyl and LVT

Not suitable for: wood or natural stone floors. For natural stone, use TileMaster Cleaner No.2.

How to use

1. For a deep clean, mix Cleaner No.1 at 1 part cleaner to 4 parts water (100ml cleaner to 400ml water). The 250ml Ready to Use bottle is already pre-diluted at this strength (1 part cleaner to 4 parts water), so use it straight from the bottle.
2. Apply to the surface and leave to work for 5 minutes, keeping it wet so it does not dry on the floor.
3. Scrub with the TileMaster machine fitted with the tile and grout brush for best results, or use a stiff scrubbing brush or suitable pad.
4. Remove the dirty solution with a clean mop, sponge or cloth.
5. Rinse well with clean water.

Coverage and sizes

• Deep cleaning and degreasing: 1:4, approx. 15 m² per litre
• Tile and grout refresh: 1:12, approx. 45 m² per litre
• Maintenance clean: 1:50 (polished surfaces may need a dry buff)
• Daily clean: 1:200 (one cap in 5 litres of water); dries streak-free with no rinsing
• Available sizes: 250ml Ready to Use (pre-diluted at 1 part cleaner to 4 parts water), 1 litre and 5 litre concentrate

Always test on a small, inconspicuous area first.