Diamond Dust Honing Powder

EQUIPMENT 1. Tile Master Pad B; 2. Tile Master Machine; 3. Clean
water, wet vac, squeegee and broom; 4. Diamond Dust 200 grit.
DIRECTIONS 1. Surface must be free of all surface sealers and
coatings; 2. Sweep, vacuum, or wipe surface; 3. Sprinkle Diamond
Dust 200 grit to the surface in a manageable area; 4. Add clean
water to create a firm slurry; 5. Use a tile master machine and pad
B (green pad) and then start the cleaning process; 6. Do not allow
product to dry – add water to the slurry as required; 7. Continue
until the desired eect has been achieved; Note: Use a squeegee to
check your progress; 8. Remove the slurry with a wet vac and rinse
thoroughly with clean water and a mop or scrubber drier; 9. Repeat
process as necessary;