All in One CPS

TileMaster All in One CPS (Ceramic, Porcelain and Stone) is an impregnating sealer for man-made and natural stone tiles. It protects tiles and grout joints from dirt, grime and everyday food spills while staying invisible and breathable. It does not form a film or create a shine.

Key benefits

• Protects against both oil- and water-based stains
• Seals tiles and grout joints
• Invisible and breathable: no film, no shine
• Does not change the appearance of most surfaces
• Ready to use and easy to apply
• Makes everyday cleaning and maintenance easier

Suitable surfaces

• Ceramic and porcelain, including polished porcelain
• Marble, limestone, slate, granite and sandstone
• Grout joints
• Floors, walls, wet rooms and worktops, indoors and in covered outdoor areas

Not suitable for: protection against acid or chemical damage, surface wear or scratching.

How to use

1. Test on a small area first and allow 24 hours to cure, then check the finish, any colour change and the level of protection.
2. Make sure the surface is clean, dry and free of residue and previous treatments.
3. Apply one generous, even coat of All in One CPS to saturate the surface. It should hold a wet, glass-like look for about 5 seconds; apply more if needed.
4. After about 10 minutes, and before it dries on the surface, buff off any excess with clean, dry white cloths. To shift stubborn residue, re-wet it with a cloth dampened with the sealer.
5. On highly absorbent stone, apply a second coat after 3 hours, repeating the steps above.
6. Light foot traffic (socks and slippers) after 4 hours from the final coat. Allow 48 hours before the floor gets wet or comes into contact with possible stains.

Aftercare

Maintain sealed surfaces with TileMaster Cleaner No.1 (ceramic and porcelain) or Cleaner No.2 (natural stone), used as directed on the cleaner’s product page.

Coverage and sizes

• Polished porcelain: 40–60 m² per litre per coat
• Ceramic and porcelain grout sealing: 35–75 m² per litre
• Polished stone: 30–40 m² per litre per coat
• Unpolished and honed stone: 10–15 m² per litre per coat
• Available sizes: 250ml, 1 litre, 5 litres

Always test on a small, inconspicuous area first.