Grout Haze Removal Mop Kit with Diamond Dust

This kit has everything in the Basic Grout Haze Removal Mop Kit plus the 1750 grams pack of TileMaster Diamond Dust, a 220-grit diamond honing powder. Sprinkle the Diamond Dust on the floor first for extra cleaning power, then apply Cleaner No.4 and scrub. No.4 breaks down grout haze, cement and plaster residues and general builders’ dirt.

What’s in the kit

• TileMaster Cleaner No.4, 1 litre concentrate: a professional acid cleaner (Grout & Builders Dust Residue Remover – Acid Cleaner 4) for ceramic, porcelain and acid-resistant natural stone only. It does not tarnish aluminium or steel trims, taps, sinks or cookers.
• Diamond Dust Honing Powder, 1750 grams: a 220-grit diamond honing powder. Sprinkled on the floor before Cleaner No.4, it adds extra cleaning power. Never use it on polished or shiny floors.
• Scrub Pad – Tile and Grout Scrubbing: a heavy-duty, flexible scrub pad that cleans both tiles and grout lines, including uneven and textured floors. Rinse it with water after use.
• Aurora Spray Mop with 2 washable microfibre pads: a lightweight mop with an ergonomic handle and a 360-degree swivel head for corners and tight spaces. Never put Cleaner No.4 in the mop’s spray bottle: it can break the seal.

Who it suits

Choose this kit for stubborn haze. Diamond Dust adds extra cleaning power to Cleaner No.4 and the Scrub Pad. Cleaner No.4 covers approx. 15 m² per litre of concentrate for grout haze removal (used at 1 part cleaner to 4 parts water), so this kit covers around 15 m². For larger areas or trade use, choose the Grout Haze Removal Pro Kit.

Suitable surfaces

• Ceramic tiles
• Porcelain tiles
• Acid-resistant natural stone only
• Kitchens, hallways, bathrooms, pool surrounds and changing rooms
• Diamond Dust: never on polished or shiny floors

Not suitable for: wood, vinyl, or acid-sensitive stone such as marble, limestone and travertine. Do not use on any polished or other acid-sensitive surface. Never use Diamond Dust on polished or shiny floors. If you are unsure whether your stone is acid-resistant, test a small, inconspicuous area first or contact us before use.

How to use

1. Protect yourself: wear protective gloves and eye protection. Wear safety goggles, gloves and a dust mask/respirator when handling the dry Diamond Dust powder.
2. Test first: always test on a small, inconspicuous area first. If you are unsure whether your stone is acid-resistant, contact us before use. Never use Diamond Dust on polished or shiny floors.
3. Sprinkle Diamond Dust: for extra cleaning power, sprinkle Diamond Dust onto the floor first.
4. Dilute Cleaner No.4: mix 1 part cleaner to 4 parts water (100ml cleaner to 400ml water) in a separate container. For grout haze, always use it diluted. The neat concentrate is only for rust marks on porcelain.
5. Apply directly to the floor: apply the diluted No.4 directly to the floor over the Diamond Dust and leave it to work for 5 minutes, keeping it wet so it does not dry on the floor. Do not put No.4 in the mop’s spray bottle: it can break the seal.
6. Scrub: scrub the tiles and grout lines with the Scrub Pad on the mop, or with a TileMaster machine fitted with the tile and grout brush (machine not included).
7. Remove: take up the dirty solution with a clean mop, sponge or cloth, or extract the residue with a wet vacuum.
8. Rinse: rinse well with clean water.

Always test on a small, inconspicuous area first.

Safety

Cleaner No.4 contains orthophosphoric acid. Wear gloves and avoid contact with eyes and skin. Keep out of reach of children and pets.

Corrosive acid cleaner: contains 10–30% orthophosphoric acid and causes severe skin burns and eye damage.

• Signal word: Danger
• Pictogram: GHS05 Corrosion
• Hazard statements:
  • H314: Causes severe skin burns and eye damage
• Key precautionary statements:
  • P264: Wash hands thoroughly after handling
  • P280: Wear protective gloves/eye protection
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
  • P405: Store locked up

Always read the product label and the Cleaner No.4 Safety Data Sheet (SDS) before use. Keep out of reach of children.

Diamond Dust: H302: Harmful if swallowed. H319: Causes serious eye irritation. Wear safety goggles, gloves, and a dust mask/respirator when handling the dry powder. Use in a well-ventilated area. Never use Diamond Dust on polished or shiny floors. Always refer to the Diamond Dust Safety Data Sheet (SDS) for full health and safety guidance.

Full directions and hazard information are in the How To Use and Safety tabs.