Description
Repair chips and cracks in grey and white porcelain and ceramic tiles with White TileMaster resin filler and hardener, three colour tints, a precision filling knife and a three-grade sandpaper set.
What’s in the box
- Tile & Stone Repair Resin Filler with hardener, 125 ml, White
- Three TileMaster Filler Tints (Black, Brown and Yellow preselected; all six tint colours are available)
- Precision Filling Knife
- Porcelain Mitre Sandpaper Set: coarse, medium and fine
How to use
- Prepare the chip: pick out loose pieces, wipe away dirt and grease, vacuum the dust and put masking tape around the hole.
- Tint the filler: scoop out enough White filler (Part A). For grey, add black tint a drop at a time until it matches; warm the shade with a little brown or yellow if needed.
- Add the hardener and fill: use a pea-sized blob of hardener to a golf-ball-sized amount of filler. Mix well, then press it into the repair with the knife. You have about 15 minutes working time.
- Trim it flush: after a few minutes, peel off the tape and scrape away excess with a sharp blade so the repair is level.
- Leave it to harden: fully hard in about 1 hour. Time can vary with the size of the fill and the room.
- Smooth it: once hard, sand the repair smooth with coarse paper first, then medium, then fine.
You’ll also need
Masking tape and a sharp blade or razor scraper (not in the kit).
Safety
Wear nitrile or neoprene gloves and eye protection. Use in a well-ventilated room. The filler is flammable: keep away from flames, sparks and smoking. Test on a small hidden area first. Keep out of reach of children. Read each product’s label and Safety Data Sheet.
























What others are saying
There are no contributions yet.