0161 444 0377

info@tilemaster.co.uk

Secure transactions via your preferred payment method

Select Page

Stone Repair Resin Filler with hardner 125ml

£12.99

Description

The stone filler is a mastic made on polyester resins, which is possible to polish in line with the current shine on your tiles.

Total Tin Weight – 250gram (125ml)

 

Clear

Select quantity

Description

Tile Master filler is one of the best  ways to repair marble, traverine, and limestone.  Using the cream or white filler to call fill cracks and holes to a high standard.  Also you can mix the filler with the Colour tints to make bespoke colours.    Perfect to get a great colour match on most classic natural stones like travertine or limestone tiles.

The stone filler is a mastic made on polyester resins, which is possible to polish in line with the current shine on your tiles.  It is mainly used for gluing and filling all types of travertine and natural stones.

The Filler can be applied using our simple step by step guide. 

Filler is supplied in two parts. 

Part A – Filler

Part B – White Hardener

Additional information

Weight N/A
Colour

,

How To Use

METHOD
Always wear gloves, Stone repair resin is harder when set than most stone and is particularly difficult to get off
the skin when set.
1. Thoroughly clean the hole or crack ensuring you remove any loose debris, dirt or loose and then
vacuum to remove any remaining dust.
2. Tape around the hole or crack using a good quality masking tape. This stops any excess filler going
on the tile.
3. Remove enough Stone Resin (Part A) to fill the hole and place on a piece of old cardboard from the tin.
4. Next remove some Hardener (Part B) and place next to your Stone Resin (Part A). You want 3%
hardener to 100% Stone Resin. We normal say a golf ball size of Resin needs a Pea size of Filler. Mix these
both together to start the reaction. You now have about 15mins before the mix becomes unworkable.
5. Fill the hole or crack using the Stanley blade, and then scrape off any excess so that the filled area is
level with the masking tape. (Note very deep areas may require a two stage application).
6. Leave the filler for a few minutes to harden. Once this happen remove the masking tape and scrape off
the excess using the clean fresh Stanley blade to make the fill flush to the stone.
7. Once the filler is completely hard after 1 hour, the floor is fine to walk on and can be used as normal.

Product results

Repaired using a combination of Filler and Colour Tints After

 

 

 

Repaired using a combination of Filler and Colour Tints – Before

 

Hole Repair – Before

Hole Repair – After

 

Video

MSDS & Data Sheets

SDS Download  

Label Download

pH  NA

WARNINGS

  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • P102: Keep out of reach of children.
  • P233: Keep container tightly closed.
  • P262: Do not get in eyes, on skin, or on clothing.
  • P264: Wash skin thoroughly after handling.
  • P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
  • P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P333+313: If skin irritation or rash occurs: Get medical advice.

 

CONTAINS

 

SUBSTANCE   Codes of class and hazard category Codes of hazard

 

Quantity
CAS: 100-42-5

EINECS: 2002-851-5

n. Index: 601-026-00-0

n. REACH registration: 01-2119457861-32-XXXX

 

Flam. Liq. 3

Asp. Tox. 1

Acute tox. 4

STOT RE 1

STOT SE 3

Eye irrit 2

Skin irrit 2

H226 – H361d – H332 – H372 (auditory organ) – H315 – H319 10-20%

Find a TileMaster Pro

Find Now

Reviews

There are no reviews yet.

Be the first to review “Stone Repair Resin Filler with hardner 125ml”

Your email address will not be published. Required fields are marked *

Pin It on Pinterest