TM Grout Seal

TM Grout Seal protects the grout between your tiles from everyday dirt, grime and food spills. Just spray it onto clean, dry grout and wipe off the excess. It is invisible and breathable, so it won’t form a film or change the look of most grouts.

Key benefits

• Protects grout against oil- and water-based stains
• Invisible and breathable: no film, no shine
• Does not change the appearance of most surfaces
• For indoor and outdoor use
• 500ml ready to use: apply undiluted, straight from the bottle
• Makes cleaning and maintenance easier

Suitable surfaces

• Grout around marble, limestone, travertine and granite
• Grout around highly absorbent stone
• Grout around ceramic and porcelain tiles
• Floors, walls, wet rooms and worktops

Not suitable for: protection against acid or chemical damage, surface wear or scratching.

How to use

1. Test on a small area first and allow 24 hours to cure, then check the result.
2. Clean the area with the appropriate TileMaster cleaner and let it dry.
3. Spray TM Grout Seal undiluted, straight from the bottle, onto the grout and leave for 5 minutes.
4. Wipe any excess off the tiles with a dry cloth.
5. The area can be walked on after 3 hours.

Aftercare

Maintain sealed surfaces with TileMaster Cleaner No.1 (ceramic and porcelain) or Cleaner No.2 (natural stone), used as directed on the cleaner’s product page.

Coverage and sizes

• Coverage per 500ml: approx. 300–550 linear metres of grout
• Size: 500ml ready to use

Always test on a small, inconspicuous area first.