Porcelain Repair Kit – Clean, Repair & Seal Bundle

This kit covers the whole job for porcelain and ceramic tiles: prepare the surface, repair the chip or crack, then seal. It suits homeowners restoring a kitchen or bathroom floor who want to repair and protect it at the same time.

What’s in the box

• 1 × Ceramic & Porcelain Tile Cleaner No.1 – 250 ml ready to use; pH-neutral and biodegradable, removes grime and grease
• 1 × Tile and Stone Repair Resin Filler – white, 250 g (125 ml) with Part A filler and Part B hardener
• 5 × TileMaster Filler Tints – brown, yellow, black, red and green
• 1 × All in One – Water Based Sealer – 250 ml; protects natural stone, ceramic and porcelain tiles against oil- and water-based stains, indoors and outdoors

A filling knife is not included – see the Clean & Repair Bundle if you need one.

Who it’s for

• Porcelain and ceramic floor and wall tiles in kitchens and bathrooms
• Anyone who wants to seal the tiles after repairing them

How to use

1. Clean the damage. Remove any loose debris, dirt and grease from the chip, crack or hole, then vacuum away the dust.
2. Mask around it. Apply good-quality masking tape around the repair so excess filler stays off the tile.
3. Tint the filler (optional). Take enough filler (Part A) for the repair and mix in a tiny amount of tint at a time until the colour matches your tile.
4. Add the hardener. Add hardener (Part B) at about 3% – roughly a pea-sized amount of hardener to a golf-ball-sized amount of filler – and mix thoroughly. You then have about 15 minutes before the mix becomes unworkable.
5. Fill and level. Press the filler firmly into the damage and level it with the masking tape. Very deep areas may need a two-stage application.
6. Trim flush. After a few minutes, once the filler has started to harden, remove the tape and scrape off the excess with a clean, sharp blade so the repair sits flush with the tile.
7. Leave to harden. Once the filler is completely hard (about 1 hour), a floor can be walked on and used as normal. Curing time can vary with the amount applied and site conditions.

Once the repair has fully hardened, apply the sealer following the instructions on the sealer label.

Safety

The resin filler contains styrene. It is a flammable liquid and vapour, causes skin irritation and serious eye irritation, is suspected of damaging the unborn child and causes damage to organs through prolonged or repeated exposure. Keep away from heat, sparks and open flames – no smoking. Wear protective gloves (nitrile or neoprene) and eye protection, use in a well-ventilated area and keep out of reach of children. Please read the Safety Data Sheet before use.

See all tile repair kits.

Frequently asked questions

What sealer is included?

A 250 ml All in One – Water Based Sealer, which protects natural stone, ceramic and porcelain tiles against oil- and water-based stains.

When do I apply the sealer?

After the filler has fully hardened and any excess has been trimmed flush. Follow the instructions on the sealer label.

Does this kit include a filling knife?

No. The Clean & Repair Bundle includes a Precision Filling Knife but no sealer.

Can I choose cream filler instead of white?

This kit comes with white filler, which you can tint. Brown tint added to white gives cream shades.